• EXTREME KOREAN-BUILT POWER: Engineered and manufactured in Korea, the Synergy Mobile Audio WFO 15.2D delivers serious, competition-grade performance with premium internal components, heavy copper circuitry, and an overbuilt power supply designed for sustained high output.
• RARE 1-OHM STEREO & 2-OHM BRIDGED STABILITY: A true standout among 2-channel amplifiers, the WFO 15.2D is stable down to 1 ohm per channel and 2 ohms bridged, making it ideal for high-power midbass, subwoofer duty, and creative SPL or demo builds.
• MASSIVE RMS OUTPUT WITH REAL HEADROOM: Produces up to 1,500W RMS x 2 @ 1 ohm or 2,920W RMS x 1 bridged @ 2 ohms, delivering clean, controlled power for demanding systems without strain.
• ADVANCED TUNING & SYSTEM CONTROL: Wide-range high-pass and low-pass crossovers with X1/X10 multipliers, high damping factor (>300), and low noise floor (>100dB S/N) provide precise control and accurate sound reproduction across a broad frequency range.
• BUILT FOR DAILY OR COMPETITION USE: Features 0-gauge power and ground inputs, 8-gauge speaker outputs, panel-locking Tiffany RCA connections, 8V–16V operating range, and a high-mass aluminum heat sink for thermal stability in daily drivers, demo vehicles, and SPL competition systems.

Synergy Audio WFO 2-Channel 3,000 Watts 1 Ohm Stereo Vehicle Amplifier WFO15.2D

This listing includes

• (1) Synergy Audio 2-Ch 3K Watt Amplifier WFO15.2D

Synergy Mobile Audio raises the bar once again with the newest addition to the WFO lineup: the WFO 15.2D. This is not your average 2-channel amplifier. Built in Korea and engineered for extreme performance, the WFO 15.2D is a true powerhouse designed for systems that demand real output, real control, and real durability.

What sets the WFO 15.2D apart is its rare stability down to 1 ohm per channel in stereo mode and 2 ohms bridged, a capability almost unheard of in modern 2-channel amplifiers. That makes it an ideal choice for high-output midbass, subwoofer duty, or creative competition builds where flexibility matters just as much as raw power.

Rated at a staggering 1,500 watts RMS per channel at 1 ohm, this amplifier is built around an over-engineered power supply, heavy copper circuitry, and premium internal components. Independent amplifier testing may tell the full story on just how much power it can deliver, but on paper and in real-world installs, the WFO 15.2D is already in monster territory.

Designed to thrive in daily drivers, demo vehicles, and SPL competition systems, the WFO 15.2D delivers clean, controlled power with the headroom and reliability Synergy’s WFO series is known for.

Features

• High-end Korean design, engineering, and manufacturing
• Massive multi-transformer power supply for sustained output
• 16V capable for competition and high-voltage systems
• Fully linkable / strappable mono-block capability
• Hand-soldered nickel-plated Tiffany RCA inputs
• Overbuilt aluminum heat sink for superior thermal dissipation
• Intelligent multi-way protection circuitry for maximum reliability

Specifications:

Power Output (RMS @ 14.4V):

• 650W x 2 @ 4 Ohm
• 1,060W x 2 @ 2 Ohm
• 1,500W x 2 @ 1 Ohm

Bridged Power Output (RMS @ 14.4V):

• 2,130W x 1 @ 4 Ohm
• 2,920W x 1 @ 2 Ohm
• Frequency Response: 10Hz – 38kHz
• Signal-to-Noise Ratio: >100dB
• Damping Factor: >300
• Operating Voltage: DC 8V – 16V
• Input Sensitivity: 8V – 0.2V
• Fuse Rating: 250A

Crossover Controls

• Low-Pass Filter (X1 / X10): Channels 1 & 2: 50Hz (500Hz) – 800Hz (8kHz)
• High-Pass Filter: Channels 1 & 2: 20Hz (200Hz) – 800Hz (8kHz)

Build & Connections

• 0 Gauge power and ground inputs
• 8 Gauge speaker outputs
• Panel-locking Tiffany RCA input and output connections
• High-mass aluminum heat sink for superior thermal control

Dimensions:

• Length: 13.78" (350mm)
• Width: 9.41" ( 239mm)
• Height: 2.72" (69mm)